TA Triumph-Adler P-C3560i MFP - Manual (Page 296)

8-39
Setup and Registration (System Menu) > System Menu
Adjustment/Maintenance
[System Menu/Counter] key > [Adjustment/Maintenance]
Adjust printing quality and conduct machine maintenance.
Item Description
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value : Off, On
Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
Unusable Time *1
*1 Only on products with the fax function installed.
FAX Operation Guide.
Ping Timeout Set the time until timeout occurs when [Ping] is executed in "System/Network".
Value : 1 to 30 seconds (in 1 second increments)
Item Description
Quiet Mode Settings Lower print and scan speed for quiet processing.
Quiet Mode Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value : Off, On
Specify for Each Job It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value : Permit, Prohibit
Density Adjustment Adjust density.
Copy Adjust copy density.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box Adjust scan density when sending or storing the data in Document Box.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Contrast You can increase or decrease the overall contrast.
Copy Increases or decreases the overall contrast of copies.
Value : -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Send/Box Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value : -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Background Density Adj. Darkens or lightens overall background density adjustment.
Copy (Auto) Darkens or lightens overall background density adjustment during copying.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box (Auto) Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)