Group authorization settings, Group authorization settings -18 – TA Triumph-Adler P-C3560i MFP User Manual
Page 315
9-18
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
Group Authorization
Use the group authorization.
1
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
2
[User Login Setting] > [Group Authorization Set.] > [Group Authorization]
2
Select [On].
NOTE
To use the group authorization settings, [Network Authentication] must be selected for the authentication method in
"Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Detail".
Enabling User Login Administration (page 9-3)
Protocol Detail (page 8-28)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
3500
Login Password:
3500