PLANET IGS-10020HPT - Manual (Page 103)

User’s Manual of IGS-10020HPT
authentication protocol.

SHA : An optional flag to indicate that this user using SHA
authentication protocol.
 The value of security level cannot be modified if entry already exists.
That means must first ensure that the value is set correctly.
 Authentication
Password
A string identifying the authentication pass phrase. For MD5 authentication
protocol, the allowed string length is 8 to 32. For SHA authentication protocol, the
allowed string length is 8 to 40. The allowed content is the ASCII characters from
33 to 126.
 Privacy Protocol Indicates the privacy protocol that this entry should belong to. Possible privacy
protocol are:

None : None privacy protocol.

DES : An optional flag to indicate that this user using DES
authentication protocol.
 Privacy Password A string identifying the privacy pass phrase. The allowed string length is 8 to 32,
and the allowed content is the ASCII characters from 33 to 126.
Buttons
: Click to add a new user entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.3.4.3 SNMPv3 Groups
Configure SNMPv3 groups table on this page. The entry index keys are Security Model and Security Name. The SNMPv3
Groups screen in Figure 4-3-5 appears.
Figure 4-3-5: SNMPv3 Groups Configuration Page Screenshot
103