PLANET IGS-10020HPT - Manual (Page 210)

User’s Manual of IGS-10020HPT
The page includes the following fields:
Object Description
 DSCP Maximum numbers of supported DSCP values are 64 and valid DSCP value
ranges from 0 to 63.
 Ingress Ingress side DSCP can be first translated to new DSCP before using the DSCP
for QoS class and DPL map.
There are two configuration parameters for DSCP Translation –

Translate

Classify
 Translate The Configuration All with available values will assign to whole DSCP values.
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
 Classify Click to enable Classification at Ingress side.
 Egress There are the following configurable parameters for Egress side –

Remap DP0 Controls the remapping for frames with DP level 0.

Remap DP1 Controls the remapping for frames with DP level 1.
 Remap DP0 The Configuration All with available values will assign to whole DSCP values.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
 Remap DP1 The Configuration All with available values will assign to whole DSCP values.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
210