17 loop protection, 1 configuration – PLANET IGS-10020HPT User Manual
Page 342
Advertising
User’s Manual of IGS-10020HPT
4.17 Loop Protection
This page allows the user to inspect the current Loop Protection configurations, and possibly change them as well.
4.17.1 Configuration
This page allows the user to inspect the current Loop Protection configurations,
Figure 4-17-1:
Loop Protection Configuration Page Screenshot
The page includes the following fields:
General Settings:
Object
Description
Enable Loop
Protection
Controls whether loop protections is enabled (as a whole).
Transmission Time
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.
342
Advertising