PLANET IGS-10020HPT - Manual (Page 340)

User’s Manual of IGS-10020HPT
4.16.7 PoE Alvie Check Configuration
The IGS-10020HPT PoE Switch can be configured to monitor connected PD’s status in real-time via ping action. Once the PD
stops working and without response, IGS-10020HPT PoE Switch is going to restart PoE port port power, and bring the PD back
to work. It will greatly enhance the reliability and reduces administrator management burden.

PD Ping Alive Check Configuration
This page provides you how to configure PD Alive Check.The screen in Figure 4-16-8 appears.
Figure 4-16-8: PD Alive Check Configuration Screenshot
The page includes the following fields:
Object Description
 Mode Allows user to enable or disable per port PD Alive Check function. As default value
all ports are disabled.
 Ping PD IP Address This coulumn allows user to set PoE device IP address here for system making ping
to the PoE device. Please be noticed that the PD’s IP address must be set to the
same network segment with IGS-10020HPT PoE Switch.
 Interval Time (10~300s) This column allows user to set how long system should be issue a ping request to
PD for detecting PD is alive or dead. Interval time range is from 10 seconds to 300
seconds.
340