PLANET IGS-10020HPT - Manual (Page 371)

User’s Manual of IGS-10020HPT
IPv6 Setup
Description:
Set or show the IPv6 setup.
Syntax:
IP IPv6 Setup [<ipv6_addr>] [<ipv6_prefix>] [<ipv6_router>]
Parameters:
<ipv6_addr> : IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand
way of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example,'::192.1.2.34'.
<ipv6_prefix> : IPv6 subnet mask , default: Show IPv6 prefix
<ipv6_router> : IPv6 router , default: Show IPv6 router. IPv6 address is in 128-bit records represented as eight fields of up
to four hexadecimal digits with a colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
Default Setting:
IPv6 AUTOCONFIG mode : Disabled
IPv6 Link-Local Address: fe80::6082:cdb9:19ab:c0e2
IPv6 Address : ::192.168.0.100
IPv6 Prefix : 96
IPv6 Router : ::
Example:
Set IPv6 address:
IGS-10020HPT:/>ip ipv6 setup 2001::0002 64 2100::0001
IPv6 State
Description:
Set or show the IPv6 Interface operational state.
Syntax:
IP IPv6 State <ipv6_addr> [enable|disable]
371