PLANET IGS-10020HPT - Manual (Page 99)

User’s Manual of IGS-10020HPT
be a dot or a dash.
 Trap Destination IPv6
Address
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::'
is a special syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid IPv4 address. For example, '::192.1.2.34'.

Trap Authentication
Failure
Indicates the SNMP entity is permitted to generate authentication failure traps.
Possible modes are:

Enabled : Enable SNMP trap authentication failure.

Disabled : Disable SNMP trap authentication failure.
 Trap Link-up and
Link-down
Indicates the SNMP trap link-up and link-down mode operation. Possible modes
are:

Enabled : Enable SNMP trap link-up and link-down mode operation.

Disabled : Disable SNMP trap link-up and link-down mode operation.
 Trap Inform Mode Indicates the SNMP trap inform mode operation. Possible modes are:

Enabled : Enable SNMP trap inform mode operation.

Disabled : Disable SNMP trap inform mode operation.
 Trap Inform Timeout
(seconds)
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.
 Trap Inform Retry
Times
Indicates the SNMP trap informs retry times. The allowed range is 0 to 255.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
99