PLANET IGS-10020HPT - Manual (Page 233)

User’s Manual of IGS-10020HPT
 DIP Filter Specify the destination IP filter for this ACE.

Any : No destination IP filter is specified. (Destination IP filter is
"don't-care".)

Host : Destination IP filter is set to Host. Specify the destination IP
address in the DIP Address field that appears.

Network : Destination IP filter is set to Network. Specify the destination
IP address and destination IP mask in the DIP Address and DIP Mask
fields that appear.
 DIP Address When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
 DIP Mask When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
 ICMP Parameters
Object Description

ICMP Type Filter Specify the ICMP filter for this ACE.

Any : No ICMP filter is specified (ICMP filter status is "don't-care").

Specific : If you want to filter a specific ICMP filter with this ACE, you
can enter a specific ICMP value. A field for entering an ICMP value
appears.

ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value. The allowed range is 0 to 255. A frame that hits this ACE matches this
ICMP value.

ICMP Code Filter Specify the ICMP code filter for this ACE.

Any : No ICMP code filter is specified (ICMP code filter status is
"don't-care").

Specific : If you want to filter a specific ICMP code filter with this ACE,
you can enter a specific ICMP code value. A field for entering an ICMP
code value appears.

ICMP Code Value When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value. The allowed range is 0 to 255. A frame that hits this ACE
matches this ICMP code value.
 TCP/UDP Parameters
Object Description

TCP/UDP Source Filter Specify the TCP/UDP source filter for this ACE.

Any : No TCP/UDP source filter is specified (TCP/UDP source filter
status is "don't-care").
233