PLANET IGS-10020HPT - Manual (Page 42)

User’s Manual of IGS-10020HPT
2.2.2 DIN-Rail Mounting
This section describes how to install the Industrial Managed Switch.
There have two methods to install the Industrial Managed Switch. DIN-Rail Mounting and Wall Mount Plate Mounting. Please
read the following topics and perform the procedures in the order being presented.
As following all DIN-Rail installation steps we use an example device to show how we install DIN-Rail
kit, procedure of the IGS-10020HPT is same as the example device.
Step 1: Screw the DIN-Rail on the Industrial Managed Switch.
Step 2: Lightly press the button of DIN-Rail into the track.
42