PLANET IGS-10020HPT - Manual (Page 324)

User’s Manual of IGS-10020HPT
4.15.1 Ping
This page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues.
After you press “Start”, 5 ICMP packets are transmitted, and the sequence number and roundtrip time are displayed upon
reception of a reply. The page refreshes automatically until responses to all packets are received, or until a timeout occurs. The
ICMP Ping screen in Figure 4-15-1 appears.
Figure 4-15-1: ICMP Ping Page Screenshot
The page includes the following fields:
Object Description

IP Address The destination IP Address.

Ping Length The payload size of the ICMP packet. Values range from 2 bytes to 1452 bytes.
 Ping Count The count of the ICMP packet. Values range from 1 time to 60 times.
 Ping Interval The interval of the ICMP packet. Values range from 0 second to 30 seconds.
Be sure the target IP Address is within the same network subnet of the switch, or you had setup the
correct gateway IP address.
Button
: Click to start transmitting ICMP packets.
: Click to re-start diagnostics with PING.
324