PLANET IGS-10020HPT - Manual (Page 379)

User’s Manual of IGS-10020HPT
Port Power
Description:
Set or show the port PHY power mode.
Syntax:
Port Power [<port_list>] [enable|disable|actiphy|dynamic]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable all power control
disable : Disable all power control
actiphy : Enable ActiPHY power control
dynamic : Enable Dynamic power control
Default Setting:
disable
Example:
Disable port power function for port1-4
IGS-10020HPT:/>port power 1-4 enable
Port Excessive
Description:
Set or show the port excessive collision mode.
Syntax:
Port Excessive [<port_list>] [discard|restart]
Parameters:
<port_list> : Port list or 'all', default: All ports
discard : Discard frame after 16 collisions
restart : Restart backoff algorithm after 16 collisions
(default: Show mode)
Default Setting:
Discard
379