Qos qcl delete – PLANET IGS-10020HPT User Manual
Page 528
User’s Manual of IGS-10020HPT
<etype>
: Ethernet Type: 0x600-0xFFFF or 'any' but excluding 0x800(IPv4) and 0x86DD(IPv6)
llc
: LLC keyword
<dsap>
: Destination Service Access Point: 0x00-0xFF or 'any'
<ssap>
: Source Service Access Point: 0x00-0xFF or 'any'
<control>
: LLC control: 0x00-0xFF or 'any'
snap
: SNAP keyword
<pid>
: Protocol ID (EtherType) or 'any'
ipv4
: IPv4 keyowrd
<protocol>
: IP protocol number: (0-255, TCP or UDP) or 'any'
<sip>
: Source IP address: (a.b.c.d/n) or 'any'
<dscp>
: DSCP:(0-63,BE,CS1-CS7,EF or AF11-AF43)or'any',specific/range
<fragment>
: IPv4 frame fragmented: yes|no|any
<sport>
: Source TCP/UDP port:(0-65535) or 'any',specific or port range
<dport>
: Dest. TCP/UDP port:(0-65535) or 'any', specific or port range
ipv6
: IPv6 keyowrd
<sip_v6>
: IPv6 source address: (a.b.c.d/n) or 'any', 32 LS bits
<class>
: QoS Class: "class (0-7)", default: basic classification
<dp>
: DP Level: "dp (0-1)", default: basic classification
<classified_dscp>
: DSCP: "dscp (0-63, BE, CS1-CS7, EF or AF11-AF43)"
QoS QCL Delete
Description:
Delete QCE entry from QoS Control list.
Syntax:
QoS QCL Delete <qce_id>
Parameters:
<qce_id>
: QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
IGS-10020HPT:/> QoS Storm multicast enable 2
528