PLANET IGS-10020HPT - Manual (Page 232)

User’s Manual of IGS-10020HPT
defining UDP parameters will apper. These fields are explained later in
this help file.

TCP : Select TCP to filter IPv4 TCP protocol frames. Extra fields for
defining TCP parameters will appear. These fields are explained later
in this help file.
 IP Protocol Value When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
 IP TTL Specify the Time-to-Live settings for this ACE.

zero : IPv4 frames with a Time-to-Live field greater than zero must not
be able to match this entry.

non-zero : IPv4 frames with a Time-to-Live field greater than zero must
be able to match this entry.

Any : Any value is allowed ("don't-care").
 IP Fragment Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.

No : IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.

Yes : IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.

Any : Any value is allowed ("don't-care").
 IP Option Specify the options flag setting for this ACE.

No : IPv4 frames where the options flag is set must not be able to
match this entry.

Yes : IPv4 frames where the options flag is set must be able to match
this entry.

Any : Any value is allowed ("don't-care").
 SIP Filter Specify the source IP filter for this ACE.

Any : No source IP filter is specified. (Source IP filter is "don't-care".)

Host : Source IP filter is set to Host. Specify the source IP address in
the SIP Address field that appears.

Network : Source IP filter is set to Network. Specify the source IP
address and source IP mask in the SIP Address and SIP Mask fields
that appear.
 SIP Address When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
 SIP Mask When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
232