PLANET IGS-10020HPT - Manual (Page 202)

User’s Manual of IGS-10020HPT
Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
All means all ports will have one specific setting.
 DP Level The Configuration All with available values will assign to whole ports.
Controls the default DP level, i.e., the DP level for frames not classified in any
other way.
All means all ports will have one specific setting.

PCP The Configuration All with available values will assign to whole ports.
Controls the default PCP for untagged frames.
All means all ports will have one specific setting.

DEI The Configuration All with available values will assign to whole ports.
Controls the default DEI for untagged frames.
All means all ports will have one specific setting.

Tag Class Shows the classification mode for tagged frames on this port.

Disabled : Use default QoS class and DP level for tagged frames.

Enabled : Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
For more detail information, please refer to chapter 4.9.3.1.

DSCP Based Click to Enable DSCP Based QoS Ingress Port Classification.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.4.1 QoS Ingress Port Tag Classification
The clasification modes for tagged frames are configured on this page. The QoS Ingress Port Tag Classification screen in Figure
4-9-5 appears.
202