4 poe status – PLANET IGS-10020HPT User Manual
Page 334
User’s Manual of IGS-10020HPT
named Low, High and Critical.
The priority is used in the case when total power consumption has been over
total power budget. In this case the port with the lowest priority will be turn off,
and offer power for the port of higher priority.
Power Allocation
It can limit the port PoE supply watts. Per port maximum value must less than
30.8 watts
, total ports values must less than the Power Reservation value.
Once power overload detected, the port will auto shut down and keep on
detection mode until PD’s power consumption lower than the power limit value
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.4 PoE Status
This page allows the user to inspect the total power consumption, total power reserved and current status for all PoE ports. The
screen in
Figure 4-16-4
appears.
Figure 4-16-4:
PoE Status Screenshot
334