ProSoft Technology MVI94-DNP - Manual (Page 119)

MVI94-DNP ♦ Flex I/O Reference
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 119 of 131
December 17, 2010
Time-outs while waiting for:
Data Link Confirm : Configurable at module start-up (1 to 65535 mSec)
Complete Application Fragment : Configurable at module start-up
Application Confirm : Configurable at module start-up (1 to 65535 mSec)
Complete Application Response : None
Sends/Executes Control Operations:
WRITE Binary Outputs : Never
SELECT/OPERATE : Always
DIRECT OPERATE : Always
DIRECT OPERATE-NO ACK : Always
Count > 1 : Always (1 to 65535)
Pulse On : Always
Pulse Off : Always
Latch On : Always
Latch Off : Always
Queue : Never
Clear Queue : Never
Reports Binary Input Change Events when no Reports time-tagged Binary Input Change Events
specific variation requested: when no specific variation requested:
Only time-tagged Binary Input Change with Time
Sends Unsolicited Responses: Sends Static Data in Unsolicited Responses:
This is configurable at module start-up. If the Never
number of events for the Binary or Analog Input
Events is greater than 0, unsolicited responses
are supported. Use the Enable/Disable
Unsolicited function code from the DNP master for
control.
Default Counter Object/Variation: Counters Roll Over at:
Object : 20 32 Bits
Variation : 5
Sends Multi-Fragment Responses: Yes