ProSoft Technology MVI94-DNP - Manual (Page 21)

MVI94-DNP ♦ Flex I/O Configuration
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 21 of 131
December 17, 2010
3.1.1 Editing the Configuration File
The DNPSNET_Q.CFG file consists of the following sections:

[Module]

[Backplane Configuration]

[DNP ENET Slave]

[DNP ENET IP Addresses]

[DNP Slave Binary Inputs]

[DNP Slave Analog Inputs]

[DNP Slave Float Inputs]

Important notes to consider when editing the sample configuration file:

Comments within the file are preceded by the pound (#) sign. Any text on a
line that occurs after the # character will be ignored.

Do not use tabs or other non-printing characters instead of spaces to
separate parameters (spacebar).

Parameter names must begin in the first column of a line, and may not be
preceded with a space (spacebar) or other non-printing character.
The Master.Cfg or Slave.Cfg file is a plain ASCII text file. Use a text editor such
as Notepad.exe (included with Microsoft Windows) to open and edit the file.
To open the configuration file in Notepad
1 Click the S TART
button, and then choose P
ROGRAMS
2 Expand the Programs menu, and then choose A CCESSORIES
.
3 On the Accessories menu, choose N OTEPAD .
4 In Notepad, open the F ILE
menu, and then choose O
PEN