ProSoft Technology MVI94-DNP - Manual (Page 25)

MVI94-DNP ♦ Flex I/O Configuration
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 25 of 131
December 17, 2010
3.4 [DNP Slave Database]
The [DNP SLAVE DATABASE] section is only used if the module is simulating a
slave device. This section contains the information to size the database to be
used to interface with the remote master. The values entered in this section
define the blocks to be transferred between the module and the processor over
the backplane and the data to be interfaced with the remote DNP master device.
The parameters defined in this section are shown in the configuration form (page
95).
3.4.1 Slave Class/Deadband Overrides
The [DNP SLAVE x INPUTS] sections are only used if the module is simulating a
slave device. These sections contain the class and deadband information to
override the default values stated under the [DNP Slave] section for each point in
the input data sets. If no overrides are to be specified for a data type, its section
can be omitted. The parameters defined in these sections are shown in the
configuration form displayed in the Reference chapter.