ProSoft Technology MVI94-DNP - Manual (Page 65)

MVI94-DNP ♦ Flex I/O Diagnostics and Troubleshooting
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 65 of 131
December 17, 2010
4.7.2 Command Error Codes
Command error codes are generated by the module's program. These errors are
generated when an error occurs when issuing a request or processing a
response of a command list function. The following tables list the command error
codes used in the module:
General Command Errors
Error Code Name Description
1 Device not defined The IED slave address referenced in the command is
not defined in the module. Check to make sure there
is an entry in the slave table for each slave device
referenced in the command list.
2 Invalid command This command is not valid. Check to make sure the
slave address parameter is greater than or equal to
zero and that the point count is not set to zero.
3 Object not supported The data object in the command is not supported by
the module. Refer to the DNP subset for the Master
Port.
4 Command function not
supported
The function specified in the command is not
supported for the object type selected. Refer to the
DNP subset for the Master Port.
10 Invalid binary input poll
command
This binary input object command is not valid.
11 Invalid binary input event
poll command
This binary input event object poll command is not
valid.
20 Invalid binary output
command function
This binary output command function is not valid.
30 Invalid counter poll
command function
The counter object poll command contains an invalid
function code.
31 Invalid counter poll
command
This counter object poll command is not valid.
40 Invalid frozen counter poll
command
This frozen counter object poll command is not valid.
50 Invalid analog input poll
command
This analog input poll command is not valid.
51 Invalid analog input event
poll command
This analog input event poll command is not valid.
60 Invalid analog output poll
command function
This analog output poll command contains an invalid
function code.
61 Invalid analog output poll
command
This analog output poll command is not valid.
70 Invalid time/date poll
command
This time/date object poll command is not valid.
80 Invalid event poll command This event poll command is not valid.