ProSoft Technology MVI94-DNP - Manual (Page 50)

Diagnostics and Troubleshooting MVI94-DNP ♦ Flex I/O
User Manual DNP 3.0 Server over Ethernet Communication Module
Page 50 of 131 ProSoft Technology, Inc.
December 17, 2010
4.4.2 DNP Database View Menu
Use this menu command to view the current contents of the selected database.
Press [D] to view a list of commands available on this menu.
Viewing Data Type Databases
Press [D] from the DNP menu, then hold down the [S
HIFT ] key and press the [/]
key.
Use the number keys 1 to 6 to select the display of the data type you wish to
view. For example, if the [1] key is pressed, the following is displayed:
Viewing Register Pages
To view sets of register pages, use the keys described below:
Command Description
[0] Display registers 0 to 99
[1] Display registers 1000 to 1099
[2] Display registers 2000 to 2099
And so on. The total number of register pages available to view depends on your
module’s configuration.