ProSoft Technology MVI94-DNP User Manual
Page 17
Advertising
MVI94-DNP ♦ Flex I/O
Hardware Installation
DNP 3.0 Server over Ethernet Communication Module
User Manual
ProSoft Technology, Inc.
Page 17 of 131
December 17, 2010
2.6
Wiring the Power Connections
External power is supplied to the Base on the 2 pin screw terminal block. The
power supply can be either 24Vdc or 12Vdc, and should be located in close
proximity of the base.
Connect dc common to the COM terminal
Connect +24V dc or +12V dc to the 24VDC terminal
Advertising