ProSoft Technology MVI94-DNP - Manual (Page 68)

Reference MVI94-DNP ♦ Flex I/O
User Manual DNP 3.0 Server over Ethernet Communication Module
Page 68 of 131 ProSoft Technology, Inc.
December 17, 2010
5.1 Product Specifications
The MVI94 DNP 3.0 Master/Slave Communication Module is a single slot, backplane compatible
DNP 3.0 interface solution for the FLEX platform. This module provides highly configurable support
of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many SCADA
and field devices supporting the DNP protocol to be integrated into the powerful FLEX platform.
The module supports DNP Subset Level 2 features and some of the Level 3 features allowing the
many SCADA and field devices supporting the DNP protocol to be integrated into the FLEX
platform. The module acts as an input/output module between the DNP network and the FLEX
backplane. The data transfer from the FLEX processor is asynchronous from the actions on the
DNP network. Databases are user defined and stored in the module to hold the data required by
the protocol.
5.1.1 General Specifications
Some of the general specifications include:

Operation via simple ladder logic

Complete setup and monitoring of module through Debug port and user
configuration file

Flex backplane interface via I/O access
5.1.2 FLEX I/O Interfaces
Specification Description
Form Factor Single Slot 1794 Backplane compatible
Locate in any slot of Backplane
Backplane current load 20 mA @ 5 V
External power supply 12 Vdc to 24 Vdc
340 mA to 170 mA
Operating temperature 0°C to 55°C (32°F to 131°F)
Storage temperature -40°C to 85°C (-40°F to 185°F)
Shock 30 g operational
50 g non-operational
5 g from 10150 Hz
Relative humidity 5% to 95% (without condensation)
LED indicators Module status
Backplane transfer status
Application status
Serial activity and error LED status
Configuration Serial port (PRT1) Mini-DIN
RS-232
Hardware handshaking
Application serial Port (PRT2) Mini-DIN
RS-232/422/485 jumper selectable
500V optical isolation from backplane
Dimensions (with Module
installed in Base)
3.7H x 3.7W x 2.7D inches
94H x 94W x 69D mm