ProSoft Technology MVI94-DNP User Manual
Page 74
Advertising
![background image](/files/866141/content/doc074.png)
Reference
MVI94-DNP ♦ Flex I/O
User Manual
DNP 3.0 Server over Ethernet Communication Module
Page 74 of 131
ProSoft Technology, Inc.
December 17, 2010
5.2.4 RS-422
The RS-422 interface requires a single four or five wire cable. The Common
connection is optional, depending on the RS-422 network devices used. The
cable required for this interface is shown below:
RS-485 and RS-422 Tip
If communication in the RS-422 or RS-485 mode does not work at first, despite
all attempts, try switching termination polarities. Some manufacturers interpret +
and -, or A and B, polarities differently.
5.2.5 DB9 to Mini-DIN Adaptor (Cable 09)
Advertising