ProSoft Technology MVI94-DNP - Manual (Page 27)

MVI94-DNP ♦ Flex I/O Configuration
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 27 of 131
December 17, 2010
3.6 [IED Database]
The [IED DATABASE] section is only used if the module is simulating a DNP
master device. The size of each point type in the database is specified in the
section. These data areas are transferred between the module and the processor
using the module's I/O image. These data areas also interface to attached IED
units connected to the port. Commands present in the master port command list
use the database to control and monitor the attached devices. The parameters
set in this section are described in the configuration form (page 95).