ProSoft Technology MVI94-DNP - Manual (Page 47)

MVI94-DNP ♦ Flex I/O Diagnostics and Troubleshooting
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 47 of 131
December 17, 2010
Setting the Debug Level
You can increase or decrease the level of debug messages sent from the module
to the Debug Menu. The following table shows the type of debugging information
for each key [0] to [9], [A] to [F]
Key None DNP Statistics Data Link Layer
Messages DPA Level
Messages
0 X
1 X
2 X
3 X X
4
5 X
6 X
7 X X
8 X
9 X X
A X X
B X X X
C X
D X X
E X X
F X X X
Viewing the Error List
Press [L] to display the last 60 errors for the DNP slave port. Refer to the error
list section of the user manual to interpret each error recorded by the module.
If there are no errors present for the module, the message "NO ERRORS FOR
SYSTEM!" is displayed.
Viewing DNP Set Up & Pointers
Press [P] to display the memory allocation and the database setup parameters.
Viewing Operating Parameters
Press [O] to view the DNP Protocol setup information (Operating Parameters) for
the module.