ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 125)

Chapter 6. Port Access
107
PON View is the default page view, All PON devices and their outlets that are
connected to the switch are listed under the
Name column.
Outlets that are synchronized or that belong to groups have a green power
outlet icon in front of their names. Click an outlet’s green icon to display which
other outlets it synchronizes with, or is grouped with. Click the green outlet
again to close the information display,
The Description column displays which KVM port the outlet is associated
with.
Action Buttons
The actions that the buttons at the bottom of the page perform are described in
the table below:
Button Action
Group View Click this button to switch the display to Group View – see The Main
Panel – Group View , page 109 for details.
Group Select the outlets that you want to form into a group, then click this
button to create it (see
Outlet Groups , page 108 for details).
Ungroup Select the outlets that you want to remove from a group, then click this
button to remove them
On Sends a Power On signal to the selected outlet(s).
Off Sends a Power Off signal to the selected outlet(s).
Reboot Sends a Reboot signal to the selected outlet(s).