ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 151)

Chapter 6. Port Access
133
2. Check the outlet or outlets you want to associate with the port.
3. Click OK .
To disassociate an outlet from a port, select it in the main panel and click
Remove .
Š
Configuration
You can configure an outlet’s settings directly from this page by clicking
the
Configuration button. When you do, the Pon Outlet Configuration
dialog box appears:
Set the configuration options according to the information in the table,
below:
Heading Explanation
Station The name of the device that the outlet belongs to.
Port The outlet’s current name
Name An editable field for naming the outlet. Each outlet can be given
a distinctive name. The maximum number of characters is 15.