ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 82)

KVM over IP Switch User Manual
64
Click to toggle Automatic or Manual mouse sync.
Š
When the selection is Automatic , a green
√
appears on the icon.
Š
When the selection is Manual , a red X appears on the icon.
See Mouse DynaSync Mode , page 90 for a complete explanation of
this feature.
Click to toggle sound from the remote server to be heard on the client
computer’s speakers on or off. The “prohibited” symbol (a red circle
with a diagonal bar) displays on the icon when the speaker is toggled
Off.
Click to display a dropdown list of User macros in order to access
and run macros more conveniently than using the Macros dialog box
(see the
Macros icon in the table above, and the Macros section on
page 66).
The Power Over the Net™ icon allows the device to be powered on,
powered off or rebooted, when the device is connected to a
compatible PON “PN” series unit. (For more information on
configuring PON features see
PON Devices , page 188).
See Power Over the Net™ , page 89 for a complete explanation of
this feature.
Under an accessed port, click to skip to the first port accessible to the
user on the entire installation without having to recall the Port Access
page.
Under an accessed port, click to skip to the first port accessible to the
user that is previous to the current one without having to recall the
Port Access page.
Under an accessed port, click to skip to the first port accessible to the
user that is after the current one without having to recall the Port
Access page.
Under an accessed port, click to skip to the last port accessible to the
user on the entire installation without having to recall the Port Access
page.
Under an accessed port, click to begin Auto Scan Mode. The KVM
over IP switch automatically switches among the ports that were
selected for Auto Scanning with the
Filter function (see Filter ,
page 99). This allows you to monitor their activity without having to
switch among them manually.
Under an accessed port, click to invoke Panel Array Mode (see Panel
Array Mode , page 218).
Under an accessed port, click to recall the GUI.
Click to bring up the Control Panel Configuration dialog box.
See
Control Panel Configuration , page 92, for details on configuring
the Control Panel.