Winclient control panel functions – ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) User Manual
Page 81
Chapter 5. The User Interface
63
WinClient Control Panel Functions
The Control Panel functions are described in the table below.
Icon
Function
This is a toggle. Click to make the Control Panel persistent – i.e., it
always displays on top of other screen elements. Click again to have
it display normally.
Click to bring up the Macros dialog box (see page 66 for details).
Click to bring up the Video Options dialog box. Right-click to perform
a quick Auto Sync (see
, page 75, for details).
Click to perform a video and mouse autosync operation. It is the
same as clicking the Auto-sync button in the
Video Options
dialog
Toggles the display between
Full Screen Mode
and
Windowed Mode
.
Click to take a snapshot (screen capture) of the remote display.
See
Snapshot
, page 93, for details on configuring the Snapshot
parameters.
Click to bring up the Message Board (see
Click to send a Ctrl+Alt+Del signal to the remote system.
Click to toggle the remote display between color and gray scale
views.
Click to bring up the
Virtual Media
dialog box. The icon changes
depending on the status of the virtual media function. See
, page 82, for specific details.
Note: This icon displays in gray when the function is disabled or not
available.
Click to zoom the remote display window.
Note:
This feature is only available in windowed mode (Full Screen
Mode is off). See
Click to bring up the on-screen keyboard (see
Click to select the mouse pointer type.
Note:
This icon changes depending on which mouse pointer type is
selected (see