ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 146)

KVM over IP Switch User Manual
128
Port Configuration
Device Level
When a device is selected in the Sidebar, the only item available under Port
Configuration is the Port Properties page with one field to configure: the
Occupy Timeout setting:
The Occupy Timeout field sets a time threshold for users on ports whose
Access Mode has been set to Occupy (see
Access Mode , page 130). If there is
no activity from the user occupying the port for the amount of time set here, the
user is timed out and the port is released. The first user to send keyboard or
mouse input after the port has been released gets to occupy the port.
Input a value from 0 to 255 seconds. The default is 3 seconds. A setting of 0
causes the port to be released the instant there is no input.