ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 210)

KVM over IP Switch User Manual
192
3. When you have finished configuring the fields, click Next to bring up the
dialog box with the Step 2 tab displayed.
4. The Step 2 dialog presents a summary of the blade server’s configuration,
including the number of blades installed. Click Save to add the blades
server to the installation.
Modifying / Deleting a Blade Server
Š
To modify a blade server’s configuration, first select it in the Sidebar, then
click
Modify . Make your changes on the Setup Blade Server dialog box.
Š
To remove a blade server, first select it in the Sidebar, then click Delete .
Web Access
To access the blade server’s Web page, first select it in the Sidebar, then click
Access Web .
Timeout The amount of time that the KVM over IP switch waits for a
response from the server before it stops scanning for
information.
Web URL Key in the server’s IP address (IPv4, IPv6, or domain name)
used to access the server via a browser.
Login Name Key in the username required for browser authentication.
Login Password Key in the password required for browser authentication.
Field Explanation