ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 35)

17
Chapter 2
Hardware Setup
Overview
For convenience and flexibility that allows USB interfaces, as well as multiple
platforms, the KVM over IP switch design utilizes KVM Adapter Cables, that
serve as intermediaries between the switch and the connected devices (see
Adapter Cable Connection Diagram , page 30 for details).
A separate KVM Adapter Cable is required for each server or device
connection. The model numbers of the Adapters are given in the
KVM Adapter
Cables section, page 9.
Before You Begin
1. Important safety information regarding the placement and
grounding of this device is provided on page 231 and onwards.
Please review it before proceeding.
2. Make sure that the power to any device that you connect to the
installation has been turned off. You m
ust unplug the power cords