ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 26)

KVM over IP Switch User Manual
8
System Requirements
Remote User Computers
Remote user computers (also referred to as client computers) are the ones the
users log into the switch with from remote locations over the Internet (see
Terminology , page xvii). The following equipment must be installed on these
computers:
Š
For best results we recommend computers with at least a P III 1 GHz
processor, with their screen resolution set to 1024 x 768.
Š
IE8 or above web browser
Š
Browsers must support 128 bit SSL encryption.
Š
For best results, a network transfer speed of at least 512kbps is
recommended.
Š
For the browser-based WinClient ActiveX Viewer, DirectX 8 must be
present, and at least 150MB of memory must be available after
installation.
Š
For the browser-based Java Client Viewer the latest version of the Java
Runtime Environment (JRE) must be installed, and at least 205MB of
memory must be available after installation.
Š
For the Windows Client AP, DirectX 8 must be present, and at least 90MB
of memory must be available after installation.
Š
For the Java Client AP, the latest version of the Java Runtime Environment
(JRE) must be installed, and at least 145MB of memory must be available
after installation.
Š
For the Log Server , you must have the Microsoft Jet OLEDB 4.0 or higher
driver installed.
Servers
Servers are the computers connected to the switch via KVM Adapter Cables
(see
Terminology , page xvii). The following equipment must be installed on
these servers:
Š
A VGA, SVGA or multisync port
Š
For USB KVM Adapter Cable Connections: a Type A USB port and USB
host controller
Š
For PS/2 KVM Adapter Cable Connections: 6-pin Mini-DIN keyboard
and mouse ports