ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 89)

Chapter 5. The User Interface
71
After creating your macros, you can run them in any of three ways:
1. By using the hotkey (if one was assigned).
2. By opening the Macro List on the Control Panel and clicking the one you
want (see page 64).
3. By opening this (Macros) dialog box
and clicking Play .
If you run the macro from this dialog box,
you have the option of specifying how the
macro runs.
Š
If you choose Play Without Wait , the macro runs the key presses one after
another with no time delay between them.
Š
If you choose Play With Time Control , the macro waits for the amount of
time between key presses that you took when you created it. Click on the
arrow next to
Play to make your choice.
Š
If you click Play without opening the list, the macro runs with the default
choice ( NoWait or TimeCtrl ), which is shown in the Playback column.
You can change the default choice by clicking on the current choice
(
NoWait in the screenshot above), and selecting the alternate choice.
Note: 1. Information about the Search function is given on page 72.
2. User Macros are stored on the Local Client computer of each user.
Therefore, there is no limitation on the of number of macros, the size
of the macro names, or makeup of the hotkey combinations that
invoke them