ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 153)

Chapter 6. Port Access
135
Š
Schedule
Clicking the Schedule button brings up a dialog box that lets you set up an
automated power management configuration for the outlet(s) associated
with the selected port.
Š
Adding an Outlet Schedule
To set up an outlet schedule, do the following:
1. Select the desired outlet in the main panel, then click Schedule . The
PON Outlet Schedule dialog box with default settings, similar to the
one below, comes up:
2. Click Add . An Outlet Schedule dialog box, similar to the one below,
comes up: