ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) User Manual

Page 152

Advertising
background image

KVM over IP Switch User Manual

134

Mode

Drop down the list to select a choice of power operation mode,
as follows:

Š

Wake On LAN

, and

System after AC Back

are Safe

Shutdown and Reboot options, and can be used for
scheduled restarts.

When an Outlet's Power Button is clicked OFF, the PON
device first sends a message to the computer telling it to
prepare for a shutdown; it then waits for the amount time set
in the

Power Off Delay

field to give the computer time to

close down, and then turns off the power.

When it is time to turn the power On, the PON device waits
for the amount time set in the

Power On Delay

field, and

then - depending on the mode chosen - either calls the
computer's modem or sends an Ethernet message to the
computer instructing it to start up again.

Note:

Refer to your PON manual for details on setting up

Safe Shutdown and Reboot.

Š

If

Kill the Power

is selected, the PON device waits for the

amount time set in the Power Off Delay field, and then turns
the Outlet's power Off. Turning the power off performs a cold
(non-safe) shutdown. There is no scheduled restart available
with this shutdown method.

Mac Address

The Mac Address of the PON unit goes here.

Power On Delay

Sets the amount of time the PON device waits after the Power
Button is clicked before it turns on the computer attached to the
corresponding outlet.

Note:

The default delay time is 0 seconds; the maximum is 999

seconds. When a series of outlets are scheduled to be
powered up, they turn on in sequence with a default delay of 10
milliseconds between each outlet.

Power Off Delay

Sets the amount of time the PON device waits after the Power
Button is clicked before it shuts down the computer attached to
the corresponding outlet.

For the

System after AC Back

option, after the delay time

expires, the PON device waits another fifteen seconds, then
shuts the computer down.

The default delay time is 15 seconds. The maximum delay time
is 999 seconds.

Heading

Explanation

Advertising