ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) User Manual
Page 192
KVM over IP Switch User Manual
174
When you have finished making your settings on this page, click
Save
.
Emergency Dial
Out
If the KVM over IP switch gets disconnected from the network, or the
network goes down, this function puts the switch on line via the ISP
dial up connection.
If you choose
PPP stays online until network recovery
, the PPP
connection to the ISP will last until the network comes back up or
the switch reconnects to it.
If you choose
PPP online time
, the connection to the ISP will
terminate after the amount of time that you specify is up. A setting
of zero means it is always on line.
Dial Out Mail
Configuration
This section provides email notification of problems that occur on
the devices connected to the KVM over IP switch's ports (see
Note:
This email notification differs from the one configured under
, page 164, in that it uses the ISP mail server rather
than the internal company’s mail server.
Key in the IPv4 address, IPv6 address, or domain name of your
SMTP server in the SMTP Server IP Address field.
Key in the email address of the person responsible for the SMTP
server (or some other equally responsible administrator), in the
Email From field.
Key in the email address (addresses) of where you want the
report sent to in the
To
field. If you are sending the report to more
than one email address, separate the addresses with a comma or
a semicolon.
If your server requires a secure SSL connection, put a check in
the
SMTP server requires secure connection (SSL)
checkbox
If your server requires authentication, put a check in the
SMTP
server requires authentication
checkbox, then key in the
appropriate account name and password in the fields, below.
Item
Action