ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 266)

KVM over IP Switch User Manual
248
When I log in with my Mac
system, the local and
remote mouse pointers do
not sync. There are two automatic Mouse DynaSync settings: the
default, and Mac2. If mouse synchronization is not
satisfactory with the default, try the Mac 2 setting. See
the Note on page 91 for details.
When I log in with my Sun
system, the local and
remote mouse pointers do
not sync Automatic Mouse DynaSync sync only supports USB
mice on Windows and Mac (G4 or higher) systems. You
must sync the pointers manually. See
Mouse DynaSync
Mode , page 90, and Manual Mouse Synchronization ,
page 91, for further details.
After doing the above, refer to Sun / Linux , page 272,
under Additional Mouse Synchronization Procedures for
further steps to take.
When I log in with my Linux
system, the local and
remote mouse pointers do
not sync. Automatic Mouse DynaSync sync only supports USB
mice on Windows and Mac (G4 or higher) systems. You
must sync the pointers manually. See
Mouse DynaSync
Mode , page 90, Manual Mouse Synchronization ,
page 91, and Mac and Linux Considerations , page 91,
for further details.
After doing the above, refer to Sun / Linux , page 272,
(under Additional Mouse Synchronization Procedures ),
for further steps to take.
Problem Resolution