ATEN KN Series 32-Port KVM over IP Switch with Dual Power/LAN (1-Local + 4-Remote Access) - Manual (Page 242)

KVM over IP Switch User Manual
224
Starting Up
To start the Log Server, either double click the program icon, or key in the full
path to the program on the command line. The first time you run it, a screen
similar to the one below appears:
Note: 1. The MAC address of the Log Server computer must be specified in
the ANMS settings – see Log Server , page 165.
2. The Log Server requires the Microsoft Jet OLEDB 4.0 driver.
See The Log Server program does not run. , page 253 if the program
doesn’t start.
The screen is divided into three components:
Š
A Menu Bar at the top
Š
A panel that will contain a list of KVM over IP switches in the middle (see
The Log Server Main Screen , page 229).
Š
A panel that will contain an Events List at the bottom
Each of the components is explained in the sections that follow.