Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 14)

Preparations Required Before Use
3JX3-002
Set up the machine following steps 1 to 5 in order. For more information about a particular step, click on the link to go
to the corresponding section. In addition, to use the machine safely, also check Preventing Unauthorized
Access(P. 8) .
Step 1 Setting Up Using the Setup Guide(P. 10)
Step 2 Setting Up the Network Environment(P. 15)
● Configure the network settings that are not covered in the Setup Guide. If you do not need
to use the Setup Guide, configure the network settings from here.
Step 3 Installing Drivers(P. 79)
Step 4 Configuring Initial Settings for Fax Functions(P. 80)
Step 5 Configuring Scan Settings(P. 85)
Setting Up
6