Switch to auto rx>(p. 533) – Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual

Page 541

Advertising

1 to 2 to 99 (time(s))

<Menu> <Function Settings> <Receive/Forward> <Fax Settings> <Incoming Ring> Select
<On> in <Use Incoming Ring> Enter the desired number in <Number of Rings> <Apply>

●

When <On> is specified, you need to connect your telephone to the machine beforehand.

●

When <Off> is specified, the machine does not enter sleep mode.

<Remote RX>

Specify settings for receiving a fax by operating a telephone that is connected to the machine (Remote

Reception). When a fax is sent to the machine, you can receive it just by picking up the handset of the telephone

and entering a specific ID number by using the telephone. This feature can save you the trouble of going all the

way to the machine. For instructions on how to use Remote Reception, see Using a Telephone to Receive

Faxes (Remote Reception)(P. 226) .

<Use Remote RX>

00 to 25 to 99

<Menu> <Function Settings> <Receive/Forward> <Fax Settings> <Remote RX> Select
<On> in <Use Remote RX> Enter the ID number in <Remote RX ID> <Apply>

<Switch to Auto RX>

Specify settings for automatically receiving a fax after the machine has rung for a specified time period. This

feature is only available when <Manual> is selected for the receive mode. By using this feature, faxes can be

received even when no one is available to pick up the handset.

<Use Switch to Auto RX>

1 to 15 to 99 (sec.)

Setting Menu List

533

Advertising