Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 453)

Initializing Settings
3JX3-088
You can restore the following settings:
Initializing Menu(P. 445)
Initializing Key and Certificate(P. 445)
Initializing Address Book(P. 446)
Initializing All Data/Settings(P. 446)
Initializing Menu
You can restore the settings of the machine ( Setting Menu List(P. 448) ). Depending on the settings selected, you
may need to restart the machine after initialization.
<Menu> <Management Settings> <Data Management> <Initialize Menu> Select the item
you want to initialize <Yes>
(Restart the machine if necessary)
● You can restore the settings only for <Network> in <Preferences>.
<Menu> <Preferences> <Network> <Initialize Network Settings> <Yes> <OK> Restart the
machine
Initializing Key and Certificate
You can restore the settings of the key and certificate and the CA certificate. Note that all the keys and certificates and
CA certificates that you registered in the machine (except the preinstalled keys and CA certificates) will be deleted after
initializing.
● After initializing, functions that require a key and certificate such as TLS encrypted communication and IKE
of IPSec communication are not available. To use these functions, configure the settings for the key and
certificate and activate the functions again.
<Menu> <Management Settings> <Data Management> <Initialize Key and
Certificate> <Yes>
Managing the Machine
445