Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 537)

<Off>
<On>
<Print Position>
<Inside Image Area>
<Outside Image Area>
<Mark Number As>
<Fax>
<Tel>
<Menu> <Function Settings> <Send> <Fax Settings> <TX Terminal ID> Select <On> in
<Add TX Terminal ID> Specify the settings <Apply>
<Print Position>
Specifies the position to print the terminal ID information in the sent fax. Select <Inside Image Area> to print
the information inside the image area, or <Outside Image Area> to print the information outside the image
area.
<Mark Number As>
Adds the "Fax" or "Tel" mark in front of the fax number registered for the machine ( Registering the Fax
Number and Unit Name(P. 82) ). Select <Tel> to indicate that the notified number is a telephone number.
<Auto Adjust VoIP Comm. Speed>
When you want to perform a successful fax communication with a partner device or on a line with which errors
tend to occur easily, you can use this function to reduce communication errors.
<Off>
<On>
<Menu> <Function Settings> <Send> <Fax Settings> <Auto Adjust VoIP Comm.
Speed> Select <Off> or <On>
● If you set the function to <On>, the communication speed may be slower.
Setting Menu List
529