Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 134)

Replacing the Pick Roller
Replace the pick roller in following procedure.
1 Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
How to Turn the Power OFF (page 57) .
2 Remove all documents from the ADF paper chute (feeder).
3 Remove the ADF paper chute (feeder).
Hold both ends of the ADF paper chute (feeder), then lift it in the direction of arrow 1 and pull it out in the
direction of arrow 2.
4 Open the ADF.
For details, refer to
How to Open the ADF (page 63) .
CAUTION
When the ADF is open, it might close accidentally. Be careful not to get your fingers
caught.
5 Remove the pick roller.
Replacing the Consumables
134