Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 222)

Setting Items Description
Dropout Color (page 242) You can exclude a color from being scanned by
selecting either red, green, or blue (three primary
colors).
Offset (page 243) Specify a starting position for scanning.
Magnification (page 244) Specify the magnification level for the feed direction.
Image Quality Mode
(page 244) To obtain an image quality that is close to the image
quality for scanning with fi-6130Z, set the image
quality mode.
Cleaning & Maintenance
(page 245) Cleaning cycle (page
245) Specify the cleaning cycle for the scanner inside.
Replacement of the Pick
Roller (page 245) Specify the replacement cycle for the pick roller.
Replacement of the Brake
Roller (page 245) Specify the replacement cycle for the brake roller
Maintenance cycle (page
246) Specify the maintenance and inspection cycle for the
scanner that is performed by a service engineer.
USB (page 246) Specify how the USB function operates.
Admin Password (page 246) Change or disable the administrator password.
Restore Factory Defaults (page 247) Restore the scanner settings to the factory default.
ATTENTION
You cannot back up or restore the scanner settings on the touch screen.
Scanner Settings (Touch Screen)
222