Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 153)

Chip Error
Memory Error
When a memory error occurs, the [Error] screen on the touch screen displays one of the following codes.
C0:E5 Memory error (Front)
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code C0:E5
C0:E6 Memory error (Back)
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code C0:E6
C0:E9 LSI error (Front)
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code C0:E9
C0:EA LSI error (Back)
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code C0:EA
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
Troubleshooting
153