Sensor error – Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner User Manual
Page 155
Sensor Error
Sensor Error
If a sensor error occurs, the [Error] screen on the touch screen displays one of the following codes.
L0:11 Sensor error
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code L0:11
L2:13 Sensor error
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code L2:13
L6:1B Sensor error
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code L6:1B
Take the following measures.
●
Clean the ultrasonic sensors and the document sensors by referring to
Cleaning the Inside of the Scanner
●
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
Troubleshooting
155