Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 230)

● 2
● 3
Auto Login
Specify an auto login method for PaperStream NX Manager.
● Disabled
This is the factory default setting.
● Username/Password
● Job Group Code
Application (Internet)
Set this item when scanning with a user application on a computer or mobile device in an
environment in which PaperStream NX Manager and a scanner are connected via the Internet.
Enable
[Enable] is set to off as the factory default.
Scanner Central Admin Server
Configure the settings for Scanner Central Admin Server to use PaperStream NX Manager.
Set this item to monitor the scanners or perform a single operation on them at the same time with
Scanner Central Admin Server.
Enable
Specify whether to use Scanner Central Admin Server.
[Enable] is set to off as the factory default.
When [Enable] is set to on, specify the following items:
● Host Name/IP address
● Port Number
The factory default setting is "20444".
[Check connection] button
Check if the scanner is connected to Scanner Central Admin Server.
Network Encryption
Specify whether to encrypt network communications.
● Encryption Off (HTTP)
This is a transmission method prioritizing the scanning speed.
This is the factory default setting.
● Encryption On (HTTPS)
This is a transmission method prioritizing the security. The scanning speed is slow with this setting.
Check connection (Ping)
Check the communication status between the scanner and the connected computer.
Scanner Settings (Touch Screen)
230