Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 246)

The factory default setting is "20".
Maintenance cycle
Specify the maintenance and inspection cycle for the scanner that is performed by a service engineer.
If the specified period has passed after the last maintenance and inspection date, the touch screen
displays a notification on when you receive a [Maintenance] message.
For regular maintenance and inspection on the scanner by a service engineer, contact the distributor/
dealer where you purchased this product. Refer to the contact information in the Contact List if supplied
with this product, or refer to the contact information in the Contact for Inquiries section if provided in
Safety Precautions supplied with this product, and then make an inquiry.
Enable
Specify whether or not to get a notification on the touch screen when the time for maintenance
approaches.
[Enable] is set to off as the factory default.
Cycle (months)
Specify a cycle for receiving notifications on maintenance.
The factory default setting is "12".
USB
USB
Specify how the USB function operates.
After the setting is changed, the scanner is restarted.
● Automatic
Operates in accordance with the connection environment. This is the factory default setting.
● USB 2.0
Operates with USB 2.0.
Admin Password
Admin Password
Change or disable the administrator password.
Specify whether or not to disable the administrator password depending on the operation.
Change the administrator password regularly.
Enable
[Enable] is set to on as the factory default.
Scanner Settings (Touch Screen)
246